Background Information on Vintage Kodak Slide Projectors
Kodak is an American company that produces photography equipment, and this company was founded in 1888. During the 20th century, this company made many different types of photography-related items, including slide projectors.What is a vintage slide projector?
Slide projectors are devices that project the images on slides onto a vertical surface. These machines contain high-powered lamps, and these lamps project light through a lens. Before the light goes through the lens, it passes through a slide that is held within the projector.
A slide is a type of photographic negative that is contained within a cardboard casing. These types of photographs can only be viewed when light passes through them, so they must be held up to a light source or inserted into a slide projector to be viewed. Slide projectors connect to an AC power source, and they contain internal fans that keep the components cool.What types of slides do these projectors use?
The projectors made by this company use 35-millimeter slides, and these slides were standard during the time in which slides were widely used. These slides are, in fact, the negatives of 35mm film, which was standard to film cameras at the time.How do you load slides in a vintage slide projector?
Most of these projectors use a device called a slide carousel to load and display slides. Follow these instructions to use a slide carousel:
- Step 1: Remove the carousel from the projector.
- Step 2: Insert slides into the carousel. Carousels are usually round, and they usually have slots all along their edges that can admit slides.
- Step 3: Insert the carousel back into the projector. Make sure that the carousel is engaged by the mechanisms within the projector that cause the carousel to spin.
Using a vintage projector can be a great way to share your most treasured memories with friends or family members from the comfort of your darkened living room. Follow these steps to use a slide projector after you've found a device that will suit your purposes:
- Step 1: Place the projector on a flat surface. There are special carts available that ensure that a projector is kept level.
- Step 2: Plug the slide projector into an AC power source.
- Step 3: Make sure that the projector is pointed at a blank white surface. You can either use a projection screen or a white wall.
- Step 4: Turn on the projector, and test the image that is produced by the lens. If necessary, you can change the focus of the lens or alter the brightness of the image.
- Step 5: When you're done viewing slides, turn off the projector, and disconnect it from its power source. You can then pack the projector away in its carrying case.